Training

Prerequisites

Completion of the Universal Robots Online Academy

Cost

$1,000

Terms and Conditions

• Payment must be secured by credit card or purchase order before enrollment can be confirmed.
• Registration may be cancelled by emailing [email protected]
• >3 weeks = no charge
• <3 weeks = 25% of tuition fee
• <2 weeks = 50% of tuition fee
• “No shows” = full price
• It is strongly suggested that you only make “refundable” travel & lodging arrangements.
• Shaltz Automation reserves the right to alter course schedules, content, limit class size, reschedule, discontinue, or cancel courses.

Description

This 2-day course is intended to familiarize attendees with the Universal Robots products and software interface. The course covers the concepts for the operation and programming of the robot. This includes all the setup, best-practices for programming, and set-up of logic to enable the robot to utilize different inputs or program states. The course centers around hands-on lab exercises where attendees learn to program the robot, navigate through Polyscope, and work through common robot applications.

• Setup a robot
• Operate robot in a safe way
• Make programs to mimic most manuf. applications: Pick/Place, Palletize, Machine tending, and others.
• Create and Manage program files
• Connect and utilize I/O signals
• Read and modify programs
• Perform troubleshooting

Upcoming Class

Prerequisites

Not required

Cost

$450

Terms and Conditions

Description

One-day class for those wishing to learn how to program FX3 PLCs with simple ladder logic. This class is intended for those with no prior programming experience. Learn to connect to the PLC and write simple ladder logic including:

• Inputs
• Outputs
• Internal Relays
• Data Registers
• Timers
• Counters

Class size:4 to 8 students

Attendees must bring a laptop with GX Works2 installed. Attendees must have the same software pre-installed on a PC with an internet connection. Having 2 computer screens is a big plus, but not required.

For more information contact: Leroy Bowman at 734-765-7435

Upcoming Class

Prerequisites

Not required

Cost

$750

Terms and Conditions

Description

Two-day class for those wanting to learn how to program iQ-R Series PLCs with GX Works3 Software including iQ-R Safety.This class is intended for those with basic ladder logic programming experience, and preferably knowledge of Q Series and GXW2 software.:

• Simple Ladder
• Function Blocks
• Intelligent Function Modules
• Upload/Download Programs
• Labels/Tags
• Monitor/Troubleshooting
• 1/2 day for iQ-R Safety

Class size:4 to 8 students

Attendees must bring a laptop with GX Works3 installed. Attendees must have the same software pre-installed on a PC with an internet connection. Having 2 computer screens is a big plus, but not required.

For more information contact: Leroy Bowman at 734-765-7435

Upcoming Class

Prerequisites

Not required

Cost

$750

Terms and Conditions

Description

Two-day class for those wanting to learn how to program Q Series PLCs with GX Works2 Software. Includes 1/2 day of GOT HMI programming with GT Works3 Software. This class is intended for those with basic ladder logic programming experience.

• Simple Ladder
• Function Blocks
• Intelligent Function Modules
• Upload/Download Programs
• Monitor
• Troubleshooting
• GOT Programming

Class size:4 to 8 students

Attendees must bring a laptop with GX Works2 and GT Works3 installed. Attendees must have the same software pre-installed on a PC with an internet connection. Having 2 computer screens is a big plus, but not required.

For more information contact: Leroy Bowman at 734-765-7435

Upcoming Class

Prerequisites

Not required

Cost

$450

Terms and Conditions

Description

One-day class for those wanting to learn how to program a Simple Motion Module with MR-J4 Servos. Includes overview of LD77MS, QD77MS and RD77MS. This accelerated class is intended for those with prior Q or L Series GXW2 programming knowledge, but minimal servo motion experience.

• Parameters
• Motion Type
• Synchronous Motion
• Cam Profiles
• Monitor
• Troubleshooting
• Tuning

Class size:4 to 8 students

Attendees must bring a laptop with GX Works2, GX Works3, and MR-Configurator2 installed. Attendees must have the same software pre-installed on a PC with an internet connection. Having 2 computer screens is a big plus, but not required.

For more information contact: Leroy Bowman at 734-765-7435

Upcoming Class

Prerequisites

Not required

Cost

$600 per person - includes PLC, software and lunch (a $2,000 value for just $600)

Terms and Conditions

Description

One day beginners training class on programming the world's most popular micro PLC! This training includes a FX5UMR/DS PLC and a copy of GX-WORKS3-C1 programming software to take with you! At the end of this class you will be able to program a FX5 PLC, including:

• Identify Hardware
• Memory Allocation
• Numbering Systems
• Programming Devices
• Ladder Logic
• High-Speed Counters
• Special Commands
• Special Function Modules
• Uploading/Downloading
• Monitor/Troubleshooting

Class size:4 to 8 students

Attendees must bring a laptop with GX Works2,GX Works3, and MR-Configurator2 installed

For more information contact: Koreen Stratton at [email protected], (616) 881-1121

Upcoming Class

Prerequisites

Not required

Cost

$600 per person - includes GOT Simple HMI, software and lunch (a $1,500 value for just $600)

Terms and Conditions

Description

One day training class on programming Mitsubishi's new lower cost HMI. This training includes a GS2107-WTBD HMI and a copy of GT-WORKS3-C1 programming software to take with you! At the end of this class you will be able to program a GOT Simple, including:

• Identify Hardware
• GOT to PLC communications
• Security settings
• Pushbutton / Lamp creation
• Numeric / Text display and entry
• Alarm setup and placement

Class size:4 to 8 students

Attendees must bring a laptop with GX Works2 installed

For more information contact: Koreen Stratton at (616) 881-1121

Upcoming Class